Showing 97–112 of 184 results
-
EXTECH 42512
Quick ViewCompareDual Laser InfraRed Thermometer
Fast response 30:1 InfraRed Thermometer with backlit dual LCD display
The 42512 is a dual laser IR thermometer. This IR thermometer features dual lasers for accurate targeting with a fast (0.15s) response time and has a backlit dual LCD display. Temperature range from -50 to 1000?C (-58 to 1832?F). Complete with pouch case and 9V battery.
-
EXTECH 42545
Quick ViewCompareHigh Temperature IR Thermometer
50:1 Wide range InfraRed Thermometer with laser pointer
The 42545 is a High Temperature IR Thermometer which measures up to 1832?F (-50 to 1000?C) with 50:1 distance to target ratio and laser pointer that identifies target area. High 50:1 distance to target ratio measures smaller surface areas at greater distances for safe and accurate readings. Large backlit LCD display. Adjustable emissivity. Complete with 9V battery and carrying case.
-
EXTECH 42570
Quick ViewCompareDual Laser InfraRed Thermometer
Wide Range IR Thermometer with Type K Input and USB interface
This Dual Laser Infrared Thermometer identifies the IR temperature where the dual laser converges into a single spot at approximately 50 inches from the target. Meter features fast 100 millisecond response times, Type K input, and a USB interface. Adjustable emissivity increases measurement accuracy for a variety of surfaces. Adjustable high/low set points with audible alarm alerts you when the temperature exceeds programmed set points. Featuring MAX/MIN/AVG/DIF measurements that displays the highest, lowest, average, and MAX minus MIN values. Comes complete with Type K temperature probe, USB cable and software, carrying case and 9-volt battery.
-
EXTECH 461995
Quick ViewCompare461995:?Combination Contact/Laser Photo Tachometer
Combination Contact and Non-contact rpm measurements with laser
This Tachometer provides both contact (0. 5 to 19,999 RPM) and non-contact (10 to 99,999 RPM) RPM measurement functions for use in virtually all applications. Laser guided non-contact measurements up to 6.5 ft. (2 meter) away for added safety and convenience. Comes with wheels for linear surface speed (0.2 to 6560 ft. /minute; 0.05 to 1999.9 m/minute) or RPM measurements, 4 AA batteries, 23 in. (0.6 m) reflective tape, carrying case, and user manual.
-
EXTECH BR250
Quick ViewCompareVideo Borescope/Wireless Inspection Camera
9mm camera diameter and 3.5″ Color TFT LCD Wireless Monitor
BR250 is a Video Borescope Inspection Camera with 9 mm camera diameter and 3.5 inch color TFT LCD Monitor. Ideal for Home Inspection (Inspect in walls for mold, insect infestation, electrical wire or water pipe location); HVAC ( Inspect inside ducts, behind motors and compressors); Automotive (View inside or around engines and transmissions); Industrial (Inspect weld integrity, process equipment, gears, molding machines); Aerospace (Aircraft inspections for contamination, debris, cracks or other damage), and Government (Safety and security inspections) applications. Glare-free close-up field of view. Detachable wireless color display can be viewed from a remote location up to 32 feet from measurement point. Complete with 4 x AA batteries, micro SD memory card with SD adapter, USB cable, extension tools (mirror, hook, magnet), video cable, AC Adapter (100-240V, 50/60Hz), magnetic base stand, and hard case.
-
EXTECH CG204
Quick ViewCompareAutomatic recognition of ferrous and non-ferrous substrates
The CG204 is a portable meter designed for noninvasive coating thickness measurements. The tester uses dual technology that provides automatic recognition of ferrous (magnetic induction measurement) and non-ferrous (eddy current measurement) substrates. Featuring two measuring modes: Single and Continuous, 400 reading memory storage and user-programmable high/low alarms. Comes with two AAA batteries, USB cable, software, calibration iron, calibration aluminum, precision standards, pouch case, and user manual.
-
EXTECH CL200
Quick ViewCompareExStik? Chlorine Meter
Direct reading of Total Chlorine down to 0.01ppm
CL200 is an ExStik? Chlorine Meter. This revolutionary technique measures Direct Total Residual Chlorine from 0.01ppm to 10ppm. It makes non-subjective measurements unaffected by interferences associated with traditional colorimeters and spectrophotometers like sample color, turbidity, light, and pollutants. This product comes with an electrode, five packs of 10 reagent tablets (50 tests), a protective sensor cap, a sample cup with cap, four CR2032 batteries, and a 48? neck strap.
-
EXTECH CO100
Quick ViewCompareDesktop Indoor Air Quality CO?
Measures Carbon Dioxide (CO?)
The CO100 is a desktop indoor air quality CO? monitor that measures carbon dioxide concentrations (CO?) from 0 to 9,999ppm, air temperature and humidity. With user programmable visible and audible CO? warning alarm. Meter has a maximum/minimum CO? value recall function. Maintenance free NDIR (non-dispersive infrared) CO? sensor. Complete with Universal AC adaptor.
-
EXTECH CO250
Quick ViewComparePortable Indoor Air Quality CO2
Measures Carbon Dioxide (CO2)
This Portable Indoor Air Quality CO2?Meter measures Carbon Dioxide (C02), Temperature, Humidity, Dew Point, and Wet Bulb. Checks for Carbon Dioxide (CO2) concentrations and calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit). User programmable audible alarm. Data acquisition software and cable included to record and document CO2, Humidity and Temperature data. Complete with software and cable, 4 AA batteries, and carrying case.
-
EXTECH DT100M
Quick ViewCompareLaser Distance Meter
Laser measurements up to 330ft (100m)
Extech?s DT100M measures distance up to 330ft (100m). It can calculate area and volume and the integrated Pythagorean Theorem allows the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking, 20 point memory, addition/subtraction of sequential readings, front or rear edge reference, and a Stakeout function. Large quad backlit LCD display and double molded housing. It also has a handy built-in bubble level and comes with a wrist strap and batteries.
-
EXTECH EA30
Quick ViewCompareEasyView? Wide Range Light Meter
High intensity light measurements up to 40,000Fc/400,000Lux
The EA30 Light meter sports a compact and rugged design and features a large display. Multiple wide measuring ranges: 40,000Fc in 4 ranges and 400,000Lux in 5. Data hold freezes reading on display MIN/MAX readings. Zero function Cosine and color corrected measurements. Low battery and overrange indication. Auto power off to save battery life. Meter utilizes precision silicon photodiode sensor with 3ft coiled cable for easy storage. Complete with built-in stand, remote sensor with protective cover, protective rubber holster and 6 AAA batteries.
-
EXTECH EA33
Quick ViewCompareHighest intensity light measurements up to 99,990Fc/999,900Lux
This compact and ruggedly designed meter has a wide measurement range to 99,990 Foot Candles in 5 ranges and 999,990 Lux in 5 ranges with 0.001Fc/0.01Lux resolution. Features include: Store and Recall up to 50 measurements with relative or real time clock stamp, Luminous intensity (candela) calculation, a ripple function that excludes stray light from the primary light source measurement, Multi-point average function, Timed Hold, Relative measurement in absolute value or % deviation, Comparator function with high/low alarms, and Auto Power Off with disable. Complete with built-in stand, light sensor and protective cover with 36? (0.9m) coiled cable, protective holster, 6 AAA batteries, and carrying case.
-
EXTECH EA80
Quick ViewCompareEasyView? Indoor Air Quality Meter/Datalogger
Measures CO2
The EA80 checks for Carbon Dioxide concentrations using a maintenance-free dual wave NDIR (non-dispersive infrared) CO2?sensor with a range of 0 to 6,000 PPM. It can automatically data log up to 20,000 data sets or you can manually enter up to 99 sets for later recall. Additional features include: auto power off, data hold, max/min with time stamp and alarm. Comes complete with six AAA batteries, Windows 95/98/NT/2000/ME/XP compatible software and an RS-232 interface cable.
-
EXTECH EX363
Quick ViewCompareEX363:?11 Function True RMS Multimeter
HVAC Multimeter with Non-Contact Voltage Detector & Type-K Temperature function
The EX363 is a Compact HVAC True RMS MultiMeter with a Built-in Non-Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40M?, continuity beeper with a visual alert, smart data hold, peak hold, auto power-off with disable, a relative mode for capacitance zero and offset adjustment. Additionally, the EX363 excels in HVAC flame rod measurements with a ?A function, as well as Type K Temperature measurements from -40 to 742?F (-40 to 394?C) and Frequency and Capacitance measurements. Complete with test leads, 9V battery, holster with tilt stand, general-purpose bead wire temperature probe and built-in magnet
-
EXTECH EX365
Quick ViewCompareEX365:?10 Function True RMS Multimeter
Industrial Multimeter with Non-Contact Voltage Detector
The EX365 is a Compact Industrial True RMS MultiMeter with a Built-in Non-Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40M?, continuity beeper with a visual alert, smart data hold, peak hold, auto power-off with disable, a relative mode for capacitance zero and offset adjustment. Additionally, the EX365 excels in frequency and capacitance measurements as well as commercial applications which require AC/DC current measurements from 1 mA to 10A. Complete with test leads, 9V battery, holster with tilt stand and built-in magnet
-
EXTECH EX505
Quick ViewCompareEX505:?11 Function Heavy Duty True RMS Industrial MultiMeter
True RMS DMM with 4,000 counts large LCD display, temperature function and waterproof housing
This Heavy Duty True RMS industrial MultiMeter measures AC/DC Voltage (1000V) and Current (10A), Resistance (40Mohms), Capacitance (100 microFarads), dual sensitivity Frequency (electric 1kHz/electronic 10MHz), and Type K Temperature (-4 to 1382 degrees F (-20 to 750 degrees C)). It features a 4,000 count backlit LCD, 0.5% basic accuracy, Relative/Data Hold, and Auto Power off with disable. Comes complete with test leads, magnetic hanging strap, Type K bead wire temperature probe, carrying case, and 9V battery
