FLIR IR Window 3 inch

38,144.00 GST Extra

FLIR’s IR Windows add a barrier between you and energized equipment, protecting you from arc flash accidents. IR windows are easy to install, easy to use, and will help you work with greater confidence. You’ll perform inspections more efficiently and reduce the threat of arc flash injury, all while staying in compliance with NFPA 70E requirements. Choose the anodized aluminum frame, or opt for durable stainless steel to prevent mixed metal issues.

Qty:
Compare

Description

Body Material
Anodized Aluminum
Broadband IR Short Mid & Longwave
x
Maximum Operating Temperature
500°F/260°C
NEMA Environment Type
Type 4/12 (outdoor/indoor)
Required Hole Diameter (Nominal)
3.5″ (88.9mm)
Warranty
Limited Lifetime Warranty Against Manufacturer Defects
Window Thickness
2mm (0.07″)
Imaging & Optical
Broadband IR Short Mid & Longwave
x
Crystal Insert Diameter
75mm (2.95″)
Greenlee Punch
739BB
Overall Thickness
26.86mm (1.05″)
Picture-in-Picture & Fusion Image Blending
x
Viewing Aperture Area
3739mm^2 (5.79in^2)
Viewing Aperture Diameter
69mm (2.71″)
Visible Light Spectrum
x
Measurement & Analysis
CSA Certification Product Class 3211 07
x
KEMA [IEC 62271-200]
Arc flash test standard: 5kV, 63kA for 30 cycles at 60Hz
Maximum Pullout Strength
1655 kg (3650 lbs)
TUV [ANSI – IEEE C37202 section A36]
Impact Resistant Cover
TUV [IEC 60068-2-3]
15-day extreme humidity withstand
TUV [IEC 60068-2-6]
101 m/s^2 vibration withstand
TUV [IEC 60529]
IP68
UL 50 Environment
Type 4/12
Underwriters Laboratories [UL 50V]
x
Environmental & Certifications
Maximum Operating Temperature
500°F/260°C
NEMA Environment Type
Type 4/12 (outdoor/indoor)
Optic Maximum Temperature
1355.6°C (2474°F)
Voltage Range
Any
Warranty
Limited Lifetime Warranty Against Manufacturer Defects
General
Body Material
Anodized Aluminum
Overall Height
107.4mm (4.22″)
Overall Width
99mm (3.89″)
Required Hole Diameter (Nominal)
3.5″ (88.9mm)
Window Thickness
2mm (0.07″)