Description
- IR Resolution
- 160 × 120 (19,200 pixels)
- Display Counts
- 6000
- AC/DC Voltage
- 1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3)
- AC/DC Amps
- 10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3)
- Connectivity
- Bluetooth BLE
IMAGING & OPTICAL
- Color Palettes
- Iron, rainbow, arctic, white hot, and black hot
- Field of view – visual
- 71° × 56°
- Focus
- Fixed
- Frame Rate
- 9 Hz
- Image Modes
- Thermal MSX (Multi Spectral Dynamic Imaging)
Thermal Camera only
Digital Camera only
- IR Resolution
- 160 × 120 (19,200 pixels)
- IR Sensitivity
- 150 mK (0.15°C)
- Spectral Response
- 8–14 µm
- Thermal Imaging Detector
- FLIR Lepton® microbolometer
- Visual Focus and FOV
- Fixed focus, 71° × 56° FOV
- Visual Resolution
- 2 MP (1600 × 1200 pixels)
MEASUREMENT & ANALYSIS
- AC/DC Amps
- 10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3)
- AC/DC LoZ V
- 1000 V AC RMS or 1000 V DC ±(1.3%+4)
- AC/DC mVolt
- AC 600.0 mV ±(1.0％＋3) DC 600.0 mV±(0.2%+3)
- AC/DC Voltage
- 1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3)
- Calibration Cycle
- Once per year, recommended
- Capacitance
- 10.00 mF ±(4.0%+5)
- Continuity check threshold
- 10–100Ω
- Diode Test
- 1.500 V ± 0.9%
- Display Counts
- 6000
- Frequency Counter
- 100.00 kHz ±(0.1%+5)
- Measuring Rate
- 3 samples per second
- Resistance
- 6.000 MΩ ±(0.9%+5), 60.00 MΩ ±(3.0%+5)
- Temperature Accuracy
- ±3°C (5.4°F) or ± 3% of the reading (whichever is greater) for temperatures > 25°C (77°F) ±5°C for temperatures -10°C to 25°C (14°F to 77°F)
- Temperature Range
- –5°C to 300°C (23°F to 572°F)
- Temperature Resolution
- 0.1°C (0.1°F)
- Temperature Type K thermocouple
- -40°C to 400°C DMM ± (1.0% + 3°C) / IGM ± (1.0% + 5°C)
(-40°F to 752°F DMM ± (1.0% + 5.4°F) / IGM ± (1.0% + 9°F)
- Thermal Sensitivity
- 150 mK (0.15°C)
- VFD
- AC V: 1000 V AC RMS, ±(1.3%+4) at 45∽65 Hz
COMMUNICATION & DATA STORAGE
- Communication Protocol
- METERLiNK
- Connectivity
- Bluetooth BLE
- Image File Format
- Radiometric
- Storage
- 40,000 readings per memory set
- Storage Media
- eMMC 4GB
- Stored Image Capacity
- up to 30,000
- Video Recording
- 50 minutes maximum duration
20 seconds max duration for file transmission
USER INTERFACE
- Display
- 2.8″
- Display Brightness
- High, Medium, Low
POWER
- Auto Power Off
- For Meter: set to OFF, 2, 5, or 10 minutes
For Worklight only: set to OFF, 5, 15, or 30 minutes
- Battery
- TA04, Lithium Polymer Rechargeable, 3050 mAh. Two supplied.
- Battery life
- Approx. 6.5 hours in IGM mode with display brightness set to medium.
Approx. 10 hours in Multimeter mode (medium brightness)
- Non_Contact Voltage Detector [NCV]
- Yes
GENERAL
- Dimensions (L x W x H)
- 20 cm × 9.6 cm × 5.6 cm (7.9 in × 3.8 in × 2.2 in)
- Included
- 1 x DM286 Industrial Thermal Imaging Multimeter
1 set of CATIV 600V Test Lead
1 set of CATIV 600V Alligator Clip
1 x Type-A to Micro-USB Cable (with Data transfer capability)
1 x K-type Thermocouple (-30°C to 260°C)
1 x Soft-sided carrying case
1 x FLIR Quick Start Guide
1 x FLIR Warranty Card
2 x TA04 Rechargeable Battery Cell
- Scanning Mode
- Continuous scan. Crosshairs and laser pointer targeting.
- Weight
- 569 g (1.25 lb) without battery (approx.)
- Worklights
- x1 LED
ENVIRONMENTAL & CERTIFICATIONS
- Certifications
- ETL, FCC, CE, RCM, UKCA, FDA, EN60825, EN50689
- Drop test
- 2 m (6.6 ft)
- EMC
- EN61326-1
- Emissivity Settings
- 0.10 to 1.00 (default is 0.95); select from four presets or set manually.
- IP Rating
- IP40
- Laser Pointer Power
- ≤0.39 mW
- Laser Type
- Class I (red)
- Laser Wavelength
- 640 nm to 660 nm
- Operating Altitude
- 2000 m (6560 ft)
- Operating Temp & Humidity
- -10°C to 30°C (14°F to 86°F), <85% RH
30°C to 40°C (86°F to 104°F), <75% RH
40°C to 50°C (104°F to 122°F), <45% RH
- Pollution Degree
- 2.0
- Safety
- IEC 61010-1 CAT IV – 600 V, CAT III – 1000 V
- Storage temperature and relative humidity [RH]
- -20°C to 60°C (-4°F to 140°F), 0–80% RH (without batteries)
- Warranty
- Limited 10-Year Warranty https://www.flir.com/testwarranty
ACCESSORIES
- Software
- FLIR METERLiNK® app
