Showing 33–48 of 51 results
-
FLIR SV87
₹31,769.00 GST ExtraQuick ViewCompareThe FLIR SV87 is a battery-powered remote vibration and temperature sensor designed exclusively for the SV87-KIT Vibration Monitoring Solution. It collects vibration and temperature readings every 90 seconds. This data is automatically sent to the FLIR GW65 Remote Monitoring Gateway via Bluetooth®.
•Sensitivity Range: ±32 g
•Frequency Range: 10 Hz to 1 kHz
•Operating Temperature Range: -30°C to 80°C (-22°F to 176°F)
•Typical battery life: 4 years
•3-year warrantyFor more information on the full vibration monitoring solution please visit the SV87-KIT page at flir.com/SV87-KIT
-
FLIR SV87-KIT
₹127,394.00 GST ExtraQuick ViewCompareVibration trending and analysis can help detect serious problems with industrial machines long before the damage can be seen. That’s why the FLIR SV87-KIT Vibration Monitoring Solution is essential for manufacturing processes that use rotating machinery, industrial pumps, fans, gearboxes, and motors. The included remote monitoring gateway stores sensor data and wirelessly transmits readings in real time to a mobile device or PC. This allows professionals to make knowledgeable decisions about machine operation and maintenance without having to wait for the next manual inspection – reducing unplanned downtime, lowering operational costs, and improving profitability
-
FLIR TA74
₹25,394.00 GST ExtraQuick ViewCompareThe FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
-
FLIR TA85
₹8,394.00 GST ExtraQuick ViewComparePV Test leads for CAT III to safely measure up to 1500 V with CM276 IGM Clamp Meter with Thermal Camera. Safely measure DC power measurement on solar photovoltaic (PV) applications. Test solar panel and inverter for troubleshooting and maintenance of PV systems. The leads are two test tips (male) to 4 mm (0.15 in) sheathed banana plug on 127 cm (5 in) test leads.
-
FLIR TA86
₹7,331.00 GST ExtraQuick ViewCompareMC4 PV Plugs for CAT III to safely measure up to 1500 V with FLIR CM276 IGM Clamp Meter with Thermal Camera. Safely measure DC power measurement on solar photovoltaic (PV) MC4 connection applications. Creates MC4 Connection between solar panel and clamp meter for troubleshooting and maintenance of PV systems. The lead is a MC4 (male) to 4 mm (0.15 in) sheathed banana plug on 152 cm (60 in) test leads.
-
FLIR Universal Soft Sided Case (TA15)
₹6,163.00 GST ExtraQuick ViewCompareThe FLIR TA15 is a universal, multi-compartment soft-sided case designed to protect and carry your FLIR clamp meter, flex clamp accessory, test leads, or any other tool you need on the job. It is recommended for use with any FLIR clamp meter and the FLIR Universal Flex Current Probe Accessory (TA72 or TA74). Two large instrument compartments. Removable hand strap. Quick-release belt clip. Convenient magnetic bag closure. Label/luggage tag window. Two durable side pockets (mesh/neoprene). 1-year warranty.
-
FLIR VT8-1000
₹20,081.00 GST ExtraQuick ViewCompareThe FLIR VT8-Series are high-quality voltage, continuity, and current testers. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure large-diameter cables. The VT8-600 carries a CAT III-600 V/CAT IV-300 V safety rating and a 100 A/600 V measuring range, while the VT8-1000 carries a CAT III-1000 V/CAT IV-600 V safety rating and a 200 A/1000 V measuring range. Extensive measurement features make the VT8-Series versatile tools – just one meter can get the job done
-
FLIR VT8-600
₹15,831.00 GST ExtraQuick ViewCompareThe FLIR VT8-Series are high-quality voltage, continuity, and current testers. They feature an optimized, open-jaw design that can fit into tight spaces and reliably measure large-diameter cables. The VT8-600 carries a CAT III-600 V/CAT IV-300 V safety rating and a 100 A/600 V measuring range, while the VT8-1000 carries a CAT III-1000 V/CAT IV-600 V safety rating and a 200 A/1000 V measuring range. Extensive measurement features make the VT8-Series versatile tools – just one meter can get the job done
-
FLIR Wall Cavity Probe (MR06)
₹25,394.00 GST ExtraQuick ViewCompareThe FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior walls. FLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR DM285
₹78,530.00 GST ExtraQuick ViewCompareIndustrial Thermal Imaging Multimeter with Datalogging / Wireless Connectivity and IGM
FLIR DM285 is a professional, all-in-one True RMS digital multimeter and thermal imager. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. You?ll pinpoint hot spots faster, safer, and more efficiently. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools? app for uploading thermal images and measurement data.
-
FLIR DM91
Quick ViewCompareIndustrial TRMS Multimeter with Datalogging and Wireless Connectivity
FLIR DM91 offers comprehensive features and durable design for quick and safe troubleshooting of electrical, electronic, and HVAC/R systems. Equipped with LoZ, VFD Mode, ?A current measurement capability and more, the DM91 provides trusted results for the most accurate diagnosis of problems. The DM91 is enhanced with Bluetooth? technology to wirelessly connect via METERLiNK? to FLIR infrared cameras, or to mobile devices running the FLIR Tools? app.
-
FLIR IM75
₹67,900.00 GST ExtraQuick ViewCompareIndustrial Insulation Tester and DMM Combination with VFD Mode and Bluetooth
METERLiNKFLIR IM75 is both a premier handheld insulation tester and advanced multifunction digital multimeter for installation, troubleshooting, and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption, and Earth Bond Resistance. Insulation tests can be performed instantly, continuously, and over a timed duration for in-depth assessment. The meter features METERLiNK? to embed electrical measurements into thermal images captured by FLIR infrared cameras, and Bluetooth? to view real-time readings remotely.
