Showing 1–16 of 31 results
-
FLIR 2″ pins, 1 pair (MR-PINS2)
₹3,188.00 GST ExtraQuick ViewCompareFLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR 2″ pins, 10 pairs (MR-PINS2-10)
₹25,394.00 GST ExtraQuick ViewCompareFLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR 4″ pins, 1 pair (MR-PINS4)
₹4,463.00 GST ExtraQuick ViewCompareFLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.
-
FLIR 6″ pins, 1 pair (MR-PINS6)
₹6,163.00 GST ExtraQuick ViewCompareFLIR’s new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement
-
FLIR Ball Probe Moisture Sensor (MR12)
₹19,019.00 GST ExtraQuick ViewCompareThe FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there’s no clear presence of moisture, the MR12’s ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.
-
FLIR CAT IV Silicone Test Leads (TA80)
₹2,550.00 GST ExtraQuick ViewCompare1000 V, 10 A test probes. UL certified to CAT IV–1000 V rating. Gold-plated tips for professional precision. Double-extruded multi-color silicone leads with wear indication. High-strength stress relief integrated into the probe. 41’ lead length with a total length of 46’ including the probe. Removable probe protection caps for 4mm tips.
-
FLIR General Purpose Accessory Case (TA12)
₹5,616.00 GST ExtraQuick ViewCompareSafeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions. Durable EVA protective case for general accessories. Internal flap with dual pockets separates additional storage compartments. Concealed zipper designed for dirt resistance. Resilient nylon carry strap. Ruggedized non-slip finish.
-
FLIR Hammer and Wall Cavity Probe Combo (MR08)
₹55,144.00 GST ExtraQuick ViewCompareThe MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can also reach the inside face of the exterior wall. You can also install the impact plate for use with a hammer to punch the extended pins through drywall.
-
FLIR Hammer Probe (MR07)
₹37,081.00 GST ExtraQuick ViewCompareThe MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.
-
FLIR Impact Pin Moisture Probe (MR05)
₹9,881.00 GST ExtraQuick ViewCompareThe FLIR MR05 upgrades your FLIR moisture meter to help you easily test for moisture in challenging spots—on rough or uneven surfaces, in corners, in hard woods or high-density materials, and even, with ease, in areas without a dry reference. Made with extra-durable pins and a metallic impact plate that can withstand hammering to drive pins into the hardest materials, the FLIR MR05 lets you tackle the toughest moisture-measurement challenges all day long. Key features include six additional sets of thick and thin pins, an external pin accessory for the FLIR moisture meter mount for extended reach, a 1/4″–20 integrated wrench on the cap to replace pins, a durable BNC connector, a 2 m coiled cord, and a 2 year warranty
-
FLIR Lithium Polymer Rechargeable Battery Kit (TA04-KIT)
₹9,881.00 GST ExtraQuick ViewCompareRechargeable battery kit for the FLIR DM286, DM166, DM285 and CM275 with extended battery life. The TA04-KIT includes a Li polymer rechargeable battery, an AC charging adapter with international AC inlet clips for wall outlets, and a quick start guide. Running time of up to 10 hours. The following AC inlet clips are included: North America, Europe, UK, Australia, and Korea.
-
FLIR Magnetic Hanging Strap (TA50)
₹3,506.00 GST ExtraQuick ViewCompareHang your meter on metal electrical cabinets – allowing you to focus on your testing. Magnetic strip designed for DM9x series multimeters or any meter that accepts a 1″ (25 mm) strap. Durable nylon strap. Securely fastens to the meter with an integrated mounting tab. 2 year warranty.
